aboutsummaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--README.md47
-rw-r--r--docker-compose.yml33
-rw-r--r--dump1090/Dockerfile40
-rw-r--r--dump1090/config.js125
-rw-r--r--dump1090/supervisord.conf16
-rw-r--r--fr24feed/Dockerfile28
-rw-r--r--fr24feed/fr24feed.ini6
7 files changed, 295 insertions, 0 deletions
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..2059142
--- /dev/null
+++ b/README.md
@@ -0,0 +1,47 @@
+fr24feed in Docker
+==================
+
+I'm tired of keeping track of all the hacks I needed to introduce to my Arch
+Linux installation on my Raspberry Pi to get fr24feed running, so here's a
+Docker configuration.
+
+Usage
+-----
+
+* Type in your sharing key in fr24feed/fr24feed.ini.
+
+ fr24key="0123456789abcdef"
+
+* Optionally, edit dump1090/config.js to set the correct coordinates of the
+receiver.
+
+ DefaultCenterLat = 66.5;
+ DefaultCenterLon = 25.19;
+
+ SiteShow = true;
+ SiteLat = 66.5;
+ SiteLon = 25.19;
+ SiteName = "My receiver";
+
+* Optionally, edit dump1090/supervisord.conf to set the correct coordinates of
+the receiver in dump1090-fa's arguments (`--lat` and `--lon`).
+
+ command=/usr/bin/dump1090-fa ... --lat 66.5 --lon 25.19 ...
+
+Start the containers using
+
+ docker-compose up -d
+
+You can now access the interactive map at http://0.0.0.0:8080/dump1090-fa/ and
+the fr24feed web interface at http://0.0.0.0:8754/.
+
+Stop the containers using
+
+ docker-compose down -v
+
+Development
+-----------
+
+Build the images using
+
+ docker-compose build --force-rm
diff --git a/docker-compose.yml b/docker-compose.yml
new file mode 100644
index 0000000..1e7bd91
--- /dev/null
+++ b/docker-compose.yml
@@ -0,0 +1,33 @@
+version: '3'
+services:
+ dump1090:
+ build: ./dump1090
+ devices:
+ - /dev/bus/usb
+ expose:
+ - 80
+ - 30001
+ - 30002
+ - 30003
+ - 30004
+ - 30005
+ - 30104
+ image: egortensin/dump1090
+ ports:
+ - 8080:80
+ restart: always
+ volumes:
+ - './dump1090/config.js:/usr/share/dump1090-fa/html/config.js:ro'
+ - './dump1090/supervisord.conf:/etc/supervisor/conf.d/supervisord.conf:ro'
+ fr24feed:
+ build: ./fr24feed
+ depends_on:
+ - dump1090
+ expose:
+ - 8754
+ image: egortensin/fr24feed
+ ports:
+ - 8754:8754
+ restart: always
+ volumes:
+ - './fr24feed/fr24feed.ini:/etc/fr24feed.ini:ro'
diff --git a/dump1090/Dockerfile b/dump1090/Dockerfile
new file mode 100644
index 0000000..490e5ef
--- /dev/null
+++ b/dump1090/Dockerfile
@@ -0,0 +1,40 @@
+FROM debian:stretch
+
+LABEL maintainer="Egor Tensin <Egor.Tensin@gmail.com>"
+
+# Don't prompt:
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update -yq && apt-get dist-upgrade -yq
+
+# Install dependencies (from README at https://github.com/flightaware/dump1090):
+RUN apt-get install -yq build-essential debhelper librtlsdr-dev pkg-config dh-systemd libncurses5-dev libbladerf-dev
+
+# Install Supervisor to run both lighttpd and dump1090:
+RUN apt-get install -yq supervisor
+
+# Build and install the dump1090-fa package:
+WORKDIR /tmp
+
+# Variables:
+ARG DUMP1090_VERSION=3.7.2
+ARG DUMP1090_ARCH=armhf
+
+ADD ["https://github.com/flightaware/dump1090/archive/v${DUMP1090_VERSION}.tar.gz", "./dump1090-${DUMP1090_VERSION}.tar.gz"]
+
+RUN tar xzf dump1090-${DUMP1090_VERSION}.tar.gz && \
+ cd dump1090-${DUMP1090_VERSION} && \
+ dpkg-buildpackage -b && \
+ dpkg-buildpackage -Tclean && \
+ apt-get install -yq ../dump1090-fa_${DUMP1090_VERSION}_${DUMP1090_ARCH}.deb
+
+# Create the /run/dump1090-fa directory, typically created by systemd:
+RUN mkdir --mode=0755 /run/dump1090-fa
+
+# Config files:
+COPY ["config.js", "/usr/share/dump1090-fa/html/"]
+COPY ["supervisord.conf", "/etc/supervisor/conf.d/"]
+
+EXPOSE 80 30001 30002 30003 30004 30005 30104
+
+CMD ["/usr/bin/supervisord", "--configuration=/etc/supervisor/conf.d/supervisord.conf"]
diff --git a/dump1090/config.js b/dump1090/config.js
new file mode 100644
index 0000000..b9be157
--- /dev/null
+++ b/dump1090/config.js
@@ -0,0 +1,125 @@
+// --------------------------------------------------------
+//
+// This file is to configure the configurable settings.
+// Load this file before script.js file at gmap.html.
+//
+// --------------------------------------------------------
+
+// -- Title Settings --------------------------------------
+// Show number of aircraft and/or messages per second in the page title
+PlaneCountInTitle = true;
+MessageRateInTitle = false;
+
+// -- Output Settings -------------------------------------
+// The DisplayUnits setting controls whether nautical (ft, NM, knots),
+// metric (m, km, km/h) or imperial (ft, mi, mph) units are used in the
+// plane table and in the detailed plane info. Valid values are
+// "nautical", "metric", or "imperial".
+DisplayUnits = "nautical";
+
+// -- Map settings ----------------------------------------
+// These settings are overridden by any position information
+// provided by dump1090 itself. All positions are in decimal
+// degrees.
+
+// Default center of the map.
+DefaultCenterLat = 45.0;
+DefaultCenterLon = 9.0;
+// The google maps zoom level, 0 - 16, lower is further out
+DefaultZoomLvl = 7;
+
+// Center marker. If dump1090 provides a receiver location,
+// that location is used and these settings are ignored.
+
+SiteShow = false; // true to show a center marker
+SiteLat = 45.0; // position of the marker
+SiteLon = 9.0;
+SiteName = "My Radar Site"; // tooltip of the marker
+
+// -- Marker settings -------------------------------------
+
+// These settings control the coloring of aircraft by altitude.
+// All color values are given as Hue (0-359) / Saturation (0-100) / Lightness (0-100)
+ColorByAlt = {
+ // HSL for planes with unknown altitude:
+ unknown : { h: 0, s: 0, l: 40 },
+
+ // HSL for planes that are on the ground:
+ ground : { h: 15, s: 80, l: 20 },
+
+ air : {
+ // These define altitude-to-hue mappings
+ // at particular altitudes; the hue
+ // for intermediate altitudes that lie
+ // between the provided altitudes is linearly
+ // interpolated.
+ //
+ // Mappings must be provided in increasing
+ // order of altitude.
+ //
+ // Altitudes below the first entry use the
+ // hue of the first entry; altitudes above
+ // the last entry use the hue of the last
+ // entry.
+ h: [ { alt: 2000, val: 20 }, // orange
+ { alt: 10000, val: 140 }, // light green
+ { alt: 40000, val: 300 } ], // magenta
+ s: 85,
+ l: 50,
+ },
+
+ // Changes added to the color of the currently selected plane
+ selected : { h: 0, s: -10, l: +20 },
+
+ // Changes added to the color of planes that have stale position info
+ stale : { h: 0, s: -10, l: +30 },
+
+ // Changes added to the color of planes that have positions from mlat
+ mlat : { h: 0, s: -10, l: -10 }
+};
+
+// For a monochrome display try this:
+// ColorByAlt = {
+// unknown : { h: 0, s: 0, l: 40 },
+// ground : { h: 0, s: 0, l: 30 },
+// air : { h: [ { alt: 0, val: 0 } ], s: 0, l: 50 },
+// selected : { h: 0, s: 0, l: +30 },
+// stale : { h: 0, s: 0, l: +30 },
+// mlat : { h: 0, s: 0, l: -10 }
+// };
+
+// Outline color for aircraft icons with an ADS-B position
+OutlineADSBColor = '#000000';
+
+// Outline color for aircraft icons with a mlat position
+OutlineMlatColor = '#4040FF';
+
+SiteCircles = true; // true to show circles (only shown if the center marker is shown)
+// In miles, nautical miles, or km (depending settings value 'DisplayUnits')
+SiteCirclesDistances = new Array(100,150,200);
+
+// Controls page title, righthand pane when nothing is selected
+PageName = "PiAware SkyAware";
+
+// Show country flags by ICAO addresses?
+ShowFlags = true;
+
+// Path to country flags (can be a relative or absolute URL; include a trailing /)
+FlagPath = "flags-tiny/";
+
+// Set to true to enable the ChartBundle base layers (US coverage only)
+ChartBundleLayers = false;
+
+// Provide a Bing Maps API key here to enable the Bing imagery layer.
+// You can obtain a free key (with usage limits) at
+// https://www.bingmapsportal.com/ (you need a "basic key")
+//
+// Be sure to quote your key:
+// BingMapsAPIKey = "your key here";
+//
+BingMapsAPIKey = null;
+
+// Turn on display of extra Mode S EHS / ADS-B v1/v2 data
+// This is not polished yet (and so is disabled by default),
+// currently it's just a data dump of the new fields with no UX work.
+ExtendedData = false;
diff --git a/dump1090/supervisord.conf b/dump1090/supervisord.conf
new file mode 100644
index 0000000..f375df6
--- /dev/null
+++ b/dump1090/supervisord.conf
@@ -0,0 +1,16 @@
+[supervisord]
+nodaemon=true
+
+[program:lighttpd]
+command=/usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
+stdout_logfile=/dev/stdout
+stdout_logfile_maxbytes=0
+stderr_logfile=/dev/stderr
+stderr_logfile_maxbytes=0
+
+[program:dump1090]
+command=/usr/bin/dump1090-fa --gain -10 --net --lat 45.0 --lon 9.0 --fix --write-json /run/dump1090-fa --json-location-accuracy 1
+stdout_logfile=/dev/stdout
+stdout_logfile_maxbytes=0
+stderr_logfile=/dev/stderr
+stderr_logfile_maxbytes=0
diff --git a/fr24feed/Dockerfile b/fr24feed/Dockerfile
new file mode 100644
index 0000000..57a355c
--- /dev/null
+++ b/fr24feed/Dockerfile
@@ -0,0 +1,28 @@
+FROM debian:stretch
+
+LABEL maintainer="Egor Tensin <Egor.Tensin@gmail.com>"
+
+# Don't prompt:
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update -yq && apt-get dist-upgrade -yq
+
+# Install fr24feed dependencies:
+RUN apt-get install -yq ca-certificates procps
+
+# Variables:
+ARG FR24FEED_VERSION=1.0.24-7
+ARG FR24FEED_ARCH=armhf
+
+# Download fr24feed:
+WORKDIR /tmp
+ADD ["https://repo-feed.flightradar24.com/rpi_binaries/fr24feed_${FR24FEED_VERSION}_${FR24FEED_ARCH}.tgz", "./"]
+RUN tar xzf fr24feed_${FR24FEED_VERSION}_${FR24FEED_ARCH}.tgz
+
+# fr24feed config:
+COPY ["fr24feed.ini", "/etc/"]
+
+EXPOSE 8754
+
+WORKDIR fr24feed_${FR24FEED_ARCH}
+CMD ["./fr24feed"]
diff --git a/fr24feed/fr24feed.ini b/fr24feed/fr24feed.ini
new file mode 100644
index 0000000..0ec1892
--- /dev/null
+++ b/fr24feed/fr24feed.ini
@@ -0,0 +1,6 @@
+fr24key="YOUR_SHARING_KEY"
+receiver="avr-tcp"
+host="dump1090:30002"
+bs="no"
+mlat="yes"
+mlat-without-gps="yes"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 01:43:42 +0000