fr24feed in Docker ================== [![CI](https://github.com/egor-tensin/fr24feed/actions/workflows/ci.yml/badge.svg)](https://github.com/egor-tensin/fr24feed/actions/workflows/ci.yml) I'm tired of keeping track of all the hacks I needed to introduce to my Arch Linux installation on my Raspberry Pi to get fr24feed running, so here's a Docker configuration. Usage ----- * Type in your sharing key in fr24feed/fr24feed.ini. fr24key="0123456789abcdef" * Optionally, edit dump1090/config.js to set the correct coordinates of the receiver. DefaultCenterLat = 66.5; DefaultCenterLon = 25.19; SiteShow = true; SiteLat = 66.5; SiteLon = 25.19; SiteName = "My receiver"; * Optionally, edit dump1090/supervisord.conf to set the correct coordinates of the receiver in dump1090-fa's arguments (`--lat` and `--lon`). command=/usr/bin/dump1090-fa ... --lat 66.5 --lon 25.19 ... Start the containers using make pull && make up You can now access the interactive map at http://127.0.0.1:8080/dump1090-fa/ and the fr24feed web interface at http://127.0.0.1:8754/. Stop the containers using make down Development ----------- TL;DR: build the native images using make compose/build Or, if you have Compose version 1.24.x or below, make docker/build ### Dependencies * Docker with BuildKit support (18.09 or higher), * Compose with BuildKit support for `compose/build` (1.25.0 or higher). ### Multiarch Build & push multiarch images using make buildx/create make buildx/push make buildx/rm A guide on how to set up multiarch builds can be found [here]. The goal was to have a single multiarch repo for each container in the registry. The approach is to use Docker's new BuildKit builder + the buildx command line plugin. Other possibilities are: * use QEMU + multiarch base images directly ([1][1], [2][2]), and create a manifest file manually, * build natively on multiple architectures (not sure how to combine them in a single manifest then though). [here]: https://mirailabs.io/blog/multiarch-docker-with-buildx/ [1]: https://lobradov.github.io/Building-docker-multiarch-images/ [2]: https://ownyourbits.com/2018/06/27/running-and-building-arm-docker-containers-in-x86/ Sources ------- * [dump1090]: ADS-B, Mode S, and Mode 3A/3C demodulator and decoder. * [fr24feed]: Flightradar24 software to upload decoded data to their network. [dump1090]: https://github.com/flightaware/dump1090 [fr24feed]: https://www.flightradar24.com/share-your-data