---
title: Escaping characters in Makefile
---
TL;DR: visit [this page] for a short and concise version of this article.
{: .alert .alert-success }
[this page]: {% link _notes/makefile.md %}
I'm a big sucker for irrelevant nitpicks like properly quoting arguments in
shell scripts.
I've also recently started using GNU make as a substitute for one-line shell
scripts (so instead of a bunch of scripts like build.sh, deploy.sh, test.sh I
get to have a single Makefile and can just run `make build`, `make deploy`,
`make test`).
As a side note, there's an excellent [Makefile style guide] available on the
web.
I'm going to be using a slightly modified prologue suggested in the guide in
all Makefiles in this post:
[Makefile style guide]: https://clarkgrubb.com/makefile-style-guide
```
MAKEFLAGS += --no-builtin-rules --no-builtin-variables --warn-undefined-variables
unexport MAKEFLAGS
.DEFAULT_GOAL := all
.DELETE_ON_ERROR:
.SUFFIXES:
SHELL := bash
.SHELLFLAGS := -eu -o pipefail -c
```
`make` invokes a shell program to execute recipes.
As issues of properly escaping "special" characters are going to be discussed,
the choice of shell is very relevant.
The Makefiles in this post specify `bash` explicitly using the `SHELL`
variable, but the same rules should apply for all similar `sh`-like shells.
Quoting arguments
-----------------
You should quote command arguments in `make` rule recipes, just like in shell
scripts.
This is to prevent a single argument from being expanded into multiple
arguments by the shell.
{% capture out1 %}
# Prologue goes here...
test_var := Same line?
export test_var
test:
@printf '%s\n' $(test_var)
@printf '%s\n' '$(test_var)'
@printf '%s\n' $$test_var
@printf '%s\n' "$$test_var"
{% endcapture %}
{% capture out2 %}
Same
line?
Same line?
Same
line?
Same line?
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd='make test' out=out2 %}
This is quite often sufficient to write valid recipes.
One thing to note is that you shouldn't use double quotes `"` for quoting
arguments, as they might contain literal dollar signs `$`, interpreted by the
shell as variable references, which is not something you always want.
Escaping quotes
---------------
What if `test_var` included a single quote `'`?
In that case, even the quoted `printf` invocation would break because of the
mismatch.
{% capture out1 %}
# Prologue goes here...
test_var := Includes ' quote
test:
printf '%s\n' '$(test_var)'
{% endcapture %}
{% capture out2 %}
printf '%s\n' 'Includes ' quote'
bash: -c: line 0: unexpected EOF while looking for matching `''
make: *** [Makefile:11: test] Error 2
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd='make test' out=out2 %}
One solution is to take advantage of how `bash` parses command arguments, and
replace every quote `'` by `'\''`.
This works because `bash` merges a string like `'Includes '\'' quote'` into
`Includes ' quote`.
{% capture out1 %}
# Prologue goes here...
escape = $(subst ','\'',$(1))
test_var := Includes ' quote
test:
printf '%s\n' '$(call escape,$(test_var))'
{% endcapture %}
{% capture out2 %}
printf '%s\n' 'Includes '\'' quote'
Includes ' quote
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd='make test' out=out2 %}
Surprisingly, this works even in much more complicated cases.
You can have a recipe that executes a command that takes a whole other command
(with its own separate arguments) as an argument.
I guess the most common use case is doing something like `ssh 'rm -rf
$(junk_dir)'`, but I'll use nested `bash` calls instead for simplicity.
{% capture out1 %}
# Prologue goes here...
escape = $(subst ','\'',$(1))
test_var := Includes ' quote
echo_test_var := printf '%s\n' '$(call escape,$(test_var))'
bash_test_var := bash -c '$(call escape,$(echo_test_var))'
test:
printf '%s\n' '$(call escape,$(test_var))'
bash -c '$(call escape,$(echo_test_var))'
bash -c '$(call escape,$(bash_test_var))'
{% endcapture %}
{% capture out2 %}
printf '%s\n' 'Includes '\'' quote'
Includes ' quote
bash -c 'printf '\''%s\n'\'' '\''Includes '\''\'\'''\'' quote'\'''
Includes ' quote
bash -c 'bash -c '\''printf '\''\'\'''\''%s\n'\''\'\'''\'' '\''\'\'''\''Includes '\''\'\'''\''\'\''\'\'''\'''\''\'\'''\'' quote'\''\'\'''\'''\'''
Includes ' quote
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd='make test' out=out2 %}
That's somewhat insane, but it works.
Shell output
------------
The `shell` function is one of the two most common ways to communicate with the
outside world in a Makefile (the other being environment variables).
This little `escape` function we've defined is actually sufficient to deal with
the output of the `shell` function safely.
{% capture out1 %}
# Prologue goes here...
escape = $(subst ','\'',$(1))
cwd := $(shell basename -- "$$( pwd )")
simple_var := Simple value
composite_var := Composite value - $(simple_var) - $(cwd)
.PHONY: test
test:
@printf '%s\n' '$(call escape,$(cwd))'
@printf '%s\n' '$(call escape,$(composite_var))'
{% endcapture %}
{% capture cmd2 %}
mkdir "Includes ' quote" && \
cd "Includes ' quote" && \
make -f ../Makefile test
{% endcapture %}
{% capture out2 %}
Includes ' quote
Composite value - Simple value - Includes ' quote
{% endcapture %}
{% capture cmd3 %}
mkdir 'Maybe a comment #' && \
cd 'Maybe a comment #' && \
make -f ../Makefile test
{% endcapture %}
{% capture out3 %}
Maybe a comment #
Composite value - Simple value - Maybe a comment #
{% endcapture %}
{% capture cmd4 %}
mkdir 'Variable ${reference}' && \
cd 'Variable ${reference}' && \
make -f ../Makefile test
{% endcapture %}
{% capture out4 %}
Variable ${reference}
Composite value - Simple value - Variable ${reference}
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd=cmd2 out=out2 %}
{% include jekyll-theme/shell.html cmd=cmd3 out=out3 %}
{% include jekyll-theme/shell.html cmd=cmd4 out=out4 %}
Environment variables
---------------------
Makefiles often have parameters that modify their behaviour.
The most common example is doing something like `make install
PREFIX=/somewhere/else`, where the `PREFIX` argument overrides the default
value "/usr/local".
These parameters are often defined in a Makefile like this:
```
param_name ?= Default value
```
They should be `escape`d and quoted when passed to external commands, of
course.
However, things get complicated when they contain dollar signs `$`.
`make` variables may contain references to other variables, and they're
expanded recursively either when defined (for `:=` assignments) or when used
(in all other cases, including `?=`).
{% capture out1 %}
# Prologue goes here...
escape = $(subst ','\'',$(1))
test_var ?= This is safe.
export test_var
.PHONY: test
test:
@printf '%s\n' '$(call escape,$(test_var))'
@printf '%s\n' "$$test_var"
{% endcapture %}
{% capture cmd2 %}
test_var='Variable ${reference}' make test
{% endcapture %}
{% capture out2 %}
Makefile:15: warning: undefined variable 'reference'
Variable
Variable ${reference}
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd=cmd2 out=out2 %}
Here, `$(test_var)` is expanded recursively, substituting an empty string for
the `${reference}` part.
One attempt to solve this is to escape the dollar sign in the variable value,
but that breaks the `"$$test_var"` case:
{% capture cmd1 %}
test_var='Variable $${reference}' make test
{% endcapture %}
{% capture out1 %}
Variable ${reference}
Variable $${reference}
{% endcapture %}
{% include jekyll-theme/shell.html cmd=cmd1 out=out1 %}
A working solution would be to use the `escape` function on the unexpanded
variable value.
Turns out, you can do just that using the `value` function in `make`.
{% capture out1 %}
# Prologue goes here...
escape = $(subst ','\'',$(1))
test_var ?= This is safe.
test_var := $(value test_var)
export test_var
.PHONY: test
test:
@printf '%s\n' '$(call escape,$(test_var))'
@printf '%s\n' "$$test_var"
{% endcapture %}
{% capture cmd2 %}
test_var="Quote '"' and variable ${reference}' make test
{% endcapture %}
{% capture out2 %}
Quote ' and variable ${reference}
Quote ' and variable ${reference}
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd=cmd2 out=out2 %}
This doesn't quite work though when [overriding variables] on the command line.
For example, this doesn't work:
[overriding variables]: https://www.gnu.org/software/make/manual/html_node/Overriding.html#Overriding
{% capture cmd1 %}
make test test_var='Variable ${reference}'
{% endcapture %}
{% capture out1 %}
Makefile:16: warning: undefined variable 'reference'
make: warning: undefined variable 'reference'
Variable
Variable
{% endcapture %}
{% include jekyll-theme/shell.html cmd=cmd1 out=out1 %}
This is because `make` ignores all assignments to `test_var` if it's overridden
on the command line (including `test_var := $(value test_var)`).
This can be fixed using the `override` directive for these cases only.
A complete solution that works for seemingly all cases looks like something
along these lines:
```
ifeq ($(origin test_var),environment)
test_var := $(value test_var)
endif
ifeq ($(origin test_var),environment override)
test_var := $(value test_var)
endif
ifeq ($(origin test_var),command line)
override test_var := $(value test_var)
endif
```
Here, we check where the value of `test_var` comes from using the `origin`
function.
If it was defined in the environment (the `environment` and `environment
override` cases), its value is prevented from being expanded using the `value`
function.
If it was overridden on the command line (the `command line` case), the
`override` directive is used so that the unexpanded value actually gets
assigned.
The snippet above can be generalized by defining a custom function that
produces the required `make` code, and then calling `eval`.
```
define noexpand
ifeq ($$(origin $(1)),environment)
$(1) := $$(value $(1))
endif
ifeq ($$(origin $(1)),environment override)
$(1) := $$(value $(1))
endif
ifeq ($$(origin $(1)),command line)
override $(1) := $$(value $(1))
endif
endef
test_var ?= This is safe.
$(eval $(call noexpand,test_var))
```
I couldn't find a case where the combination of `escape` and `noexpand`
wouldn't work.
You can even safely use other variable as the default value of `test_var`, and
it works:
{% capture out1 %}
# Prologue goes here...
escape = $(subst ','\'',$(1))
define noexpand
ifeq ($$(origin $(1)),environment)
$(1) := $$(value $(1))
endif
ifeq ($$(origin $(1)),environment override)
$(1) := $$(value $(1))
endif
ifeq ($$(origin $(1)),command line)
override $(1) := $$(value $(1))
endif
endef
simple_var := Simple value
test_var ?= $(simple_var) in test_var
$(eval $(call noexpand,test_var))
simple_var := New simple value
composite_var := Composite value - $(simple_var) - $(test_var)
.PHONY: test
test:
@printf '%s\n' '$(call escape,$(test_var))'
@printf '%s\n' '$(call escape,$(composite_var))'
{% endcapture %}
{% capture out2 %}
New simple value in test_var
Composite value - New simple value - New simple value in test_var
{% endcapture %}
{% capture cmd3 %}
make test test_var='Variable ${reference}'
{% endcapture %}
{% capture out3 %}
Variable ${reference}
Composite value - New simple value - Variable ${reference}
{% endcapture %}
{% capture cmd4 %}
test_var='Variable ${reference}' make test
{% endcapture %}
{% capture out4 %}
Variable ${reference}
Composite value - New simple value - Variable ${reference}
{% endcapture %}
{% include jekyll-theme/shell.html cmd='cat Makefile' out=out1 %}
{% include jekyll-theme/shell.html cmd='make test' out=out2 %}
{% include jekyll-theme/shell.html cmd=cmd3 out=out3 %}
{% include jekyll-theme/shell.html cmd=cmd4 out=out4 %}
