initial commit

1 files changed, 125 insertions, 0 deletions

diff --git a/dump1090/config.js b/dump1090/config.js
new file mode 100644
index 0000000..b9be157
--- /dev/null
+++ b/dump1090/config.js
@@ -0,0 +1,125 @@
+// --------------------------------------------------------
+//
+// This file is to configure the configurable settings.
+// Load this file before script.js file at gmap.html.
+//
+// --------------------------------------------------------
+
+// -- Title Settings --------------------------------------
+// Show number of aircraft and/or messages per second in the page title
+PlaneCountInTitle = true;
+MessageRateInTitle = false;
+
+// -- Output Settings -------------------------------------
+// The DisplayUnits setting controls whether nautical (ft, NM, knots), 
+// metric (m, km, km/h) or imperial (ft, mi, mph) units are used in the 
+// plane table and in the detailed plane info. Valid values are
+// "nautical", "metric", or "imperial".
+DisplayUnits = "nautical";
+
+// -- Map settings ----------------------------------------
+// These settings are overridden by any position information
+// provided by dump1090 itself. All positions are in decimal
+// degrees.
+
+// Default center of the map.
+DefaultCenterLat = 45.0;
+DefaultCenterLon = 9.0;
+// The google maps zoom level, 0 - 16, lower is further out
+DefaultZoomLvl   = 7;
+
+// Center marker. If dump1090 provides a receiver location,
+// that location is used and these settings are ignored.
+
+SiteShow    = false;           // true to show a center marker
+SiteLat     = 45.0;            // position of the marker
+SiteLon     = 9.0;
+SiteName    = "My Radar Site"; // tooltip of the marker
+
+// -- Marker settings -------------------------------------
+
+// These settings control the coloring of aircraft by altitude.
+// All color values are given as Hue (0-359) / Saturation (0-100) / Lightness (0-100)
+ColorByAlt = {
+        // HSL for planes with unknown altitude:
+        unknown : { h: 0,   s: 0,   l: 40 },
+
+        // HSL for planes that are on the ground:
+        ground  : { h: 15, s: 80, l: 20 },
+
+        air : {
+                // These define altitude-to-hue mappings
+                // at particular altitudes; the hue
+                // for intermediate altitudes that lie
+                // between the provided altitudes is linearly
+                // interpolated.
+                //
+                // Mappings must be provided in increasing
+                // order of altitude.
+                //
+                // Altitudes below the first entry use the
+                // hue of the first entry; altitudes above
+                // the last entry use the hue of the last
+                // entry.
+                h: [ { alt: 2000,  val: 20 },    // orange
+                     { alt: 10000, val: 140 },   // light green
+                     { alt: 40000, val: 300 } ], // magenta
+                s: 85,
+                l: 50,
+        },
+
+        // Changes added to the color of the currently selected plane
+        selected : { h: 0, s: -10, l: +20 },
+
+        // Changes added to the color of planes that have stale position info
+        stale :    { h: 0, s: -10, l: +30 },
+
+        // Changes added to the color of planes that have positions from mlat
+        mlat :     { h: 0, s: -10, l: -10 }
+};
+
+// For a monochrome display try this:
+// ColorByAlt = {
+//         unknown :  { h: 0, s: 0, l: 40 },
+//         ground  :  { h: 0, s: 0, l: 30 },
+//         air :      { h: [ { alt: 0, val: 0 } ], s: 0, l: 50 },
+//         selected : { h: 0, s: 0, l: +30 },
+//         stale :    { h: 0, s: 0, l: +30 },
+//         mlat :     { h: 0, s: 0, l: -10 }
+// };
+
+// Outline color for aircraft icons with an ADS-B position
+OutlineADSBColor = '#000000';
+
+// Outline color for aircraft icons with a mlat position
+OutlineMlatColor = '#4040FF';
+
+SiteCircles = true; // true to show circles (only shown if the center marker is shown)
+// In miles, nautical miles, or km (depending settings value 'DisplayUnits')
+SiteCirclesDistances = new Array(100,150,200);
+
+// Controls page title, righthand pane when nothing is selected
+PageName = "PiAware SkyAware";
+
+// Show country flags by ICAO addresses?
+ShowFlags = true;
+
+// Path to country flags (can be a relative or absolute URL; include a trailing /)
+FlagPath = "flags-tiny/";
+
+// Set to true to enable the ChartBundle base layers (US coverage only)
+ChartBundleLayers = false;
+
+// Provide a Bing Maps API key here to enable the Bing imagery layer.
+// You can obtain a free key (with usage limits) at
+// https://www.bingmapsportal.com/ (you need a "basic key")
+//
+// Be sure to quote your key:
+//   BingMapsAPIKey = "your key here";
+//
+BingMapsAPIKey = null;
+
+// Turn on display of extra Mode S EHS / ADS-B v1/v2 data
+// This is not polished yet (and so is disabled by default),
+// currently it's just a data dump of the new fields with no UX work.
+ExtendedData = false;