blob: a56fa94c56ef5c04762fdf628c0372dc408799b6 (
plain) (
tree)
|
|
fr24feed in Docker
==================
[](https://github.com/egor-tensin/fr24feed/actions/workflows/ci.yml)
I'm tired of keeping track of all the hacks I needed to introduce to my Arch
Linux installation on my Raspberry Pi to get fr24feed running, so here's a
Docker configuration.
Usage
-----
* Type in your sharing key in fr24feed/fr24feed.ini.
fr24key="0123456789abcdef"
* Optionally, edit dump1090/config.js to set the correct coordinates of the
receiver.
DefaultCenterLat = 66.5;
DefaultCenterLon = 25.19;
SiteShow = true;
SiteLat = 66.5;
SiteLon = 25.19;
SiteName = "My receiver";
* Optionally, edit dump1090/supervisord.conf to set the correct coordinates of
the receiver in dump1090-fa's arguments (`--lat` and `--lon`).
command=/usr/bin/dump1090-fa ... --lat 66.5 --lon 25.19 ...
Start the containers using
make pull && make up
You can now access the interactive map at http://127.0.0.1:8080/dump1090-fa/
and the fr24feed web interface at http://127.0.0.1:8754/.
Stop the containers using
make down
Development
-----------
TL;DR: build the native images using
make compose/build
Or, if you have Compose version 1.24.x or below,
make docker/build
### Dependencies
* Docker with BuildKit support (18.09 or higher),
* Compose with BuildKit support for `compose/build` (1.25.0 or higher).
### Multiarch
Build & push multiarch images using
make buildx/create
make buildx/push
make buildx/rm
A guide on how to set up multiarch builds can be found [here].
The goal was to have a single multiarch repo for each container in the
registry.
The approach is to use Docker's new BuildKit builder + the buildx command line
plugin.
Other possibilities are:
* use QEMU + multiarch base images directly ([1][1], [2][2]), and create a
manifest file manually,
* build natively on multiple architectures (not sure how to combine them in a
single manifest then though).
[here]: https://mirailabs.io/blog/multiarch-docker-with-buildx/
[1]: https://lobradov.github.io/Building-docker-multiarch-images/
[2]: https://ownyourbits.com/2018/06/27/running-and-building-arm-docker-containers-in-x86/
Sources
-------
* [dump1090]: ADS-B, Mode S, and Mode 3A/3C demodulator and decoder.
* [fr24feed]: Flightradar24 software to upload decoded data to their network.
[dump1090]: https://github.com/flightaware/dump1090
[fr24feed]: https://www.flightradar24.com/share-your-data
|
